Designed for the space
Dimensions and layout are checked against the room and your priorities.
Hinged-door wardrobes in Orihuela Costa. Each door swing is checked against the bed, bedside tables and room doors. Hinges must allow access to internal drawers.
A hinged door reveals the whole module, but its width and swing must work with the bed, bedside tables, sockets and circulation. The proposal continues to prioritise durable surfaces, concealed storage and fitting coordinated with the development.
Dimensions and layout are checked against the room and your priorities.
We compare suitable materials and hardware before the specification is approved.
The quotation identifies the furniture, fitting and any optional or separate work.
Your contact coordinates questions about the proposal and the next steps.

I'm Fernando Crespo. If plans or photographs are all you have for now, send them over. We'll use them as a starting point and discuss what needs checking at the property before manufacture.
No obligation. Rough measurements are enough to get started.
More doors do not guarantee better access. We agree width, hinges, handles and modules so the elevation remains proportionate and practical. In Orihuela Costa, it is tested against gated access, seasonal occupancy, strong sunlight and rooms shared with the living area.
To settle this decision without improvising on site, we draw every door open against the bed, bedside table, wall and entrance door. The result can then be checked: the user can stand in front without becoming trapped.
We do not close this decision on an assumption. We relate door count to modules, height and elevation rhythm. The final check is straightforward: the doors do not become heavy or fragment the elevation without reason.
We select hinge quantity and type according to height, weight and opening by considering use and geometry together. Acceptance is based on this result: each door retains alignment and adjustment through use.
We align the door, division and pull-out accessories before the drawing is closed. Once that decision is made, drawers, rails and baskets remain accessible without overlap.
A hinged door works well when the elevation, interior and space in front have been drawn together. The scenarios are adjusted for apartments, terraced properties, villas and homes inside residential developments.

The solution is tested in two stages. First, we divide the elevation around personal interiors and one shared zone. Then, each person opens their module without moving another door. The approach is adapted to apartments, terraced properties, villas and homes inside residential developments, without turning location into a preset style.

This point is explained before pricing: we allow separation, an opening restriction or a proportionate trim. The later check confirms the essential result: the handle and edge do not mark the perpendicular wall. In Orihuela Costa, this decision is also checked against gated access, seasonal occupancy, strong sunlight and rooms shared with the living area.

We calculate weight, stiffness, hinges and adjustment points rather than transferring a standard composition. On that basis, the project has a specific outcome: the vertical composition does not lose stability. The actual property conditions in Orihuela Costa take priority over a catalogue solution.
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on InstagramWidth, height, handle and hinge produce different demands. The interior sets the most useful rhythm. The actual property in Orihuela Costa completes the choice.
| Configuration | Usually solves | Critical check |
|---|---|---|
| Applied handle | Most frequent use: Direct opening and visible detail | The drawing identifies: Projection, impact and ergonomics |
| Finger pull or push | Suitable situation: Quieter elevation | Acceptance criterion: Grip, fingerprints and adjustment |
| Two wide doors | The option is assessed for: Short wardrobe with broad access | A fact that changes the system: Weight and swing space |
| Four or six doors | Planning scenario: Long wall with clear modules | Verified during the survey: Rhythm, junctions and simultaneous opening |
| Full-height door | Typical context: Continuous vertical elevation | Do not close the design without reviewing: Stiffness, hinges and floor clearance |
| Separate top cupboard | Frequent application: Daily storage below, seasonal above | The survey must confirm: Horizontal line and access |
The design proposal shows the elevation closed and open, allowing swing, access and layout to be approved prior to production.
We survey the wardrobe, bed, bedside tables, doors, windows, sockets and route during design. The detail is resolved when the result is clear: each door swing starts from the complete room.
Instead of assuming a standard answer, we define quantity, width, height, joints, handles and horizontal lines. The intended result can be stated plainly: the elevation responds to the storage interior and wall proportion. For a property around Playa Flamenca, access and handling are reviewed before component sizes are fixed.
This is not about adding more modules. We align modules, rails, drawers and accessories with each opening. Usefulness is tested in one way: all contents are reached through the corresponding door.
The intended movement is documented. That is why we specify load, hinge quantity, closing, restriction and adjustment.
The door retains flatness and durability. That is why we close substrate, thickness, lacquer, veneer, board, mirror and edges.
From the first proposal, we hang, adjust gaps, check closing and review rubbing points. The expected outcome: the elevation is handed over level and functional.
Moving switches, correcting walls, decoration or removing the old wardrobe are separate items when applicable. Any additional work identified in Orihuela Costa is added only after it has been explained and priced.
Door count, height, finish, hinges, interior and fitting space change cost and programme. In Orihuela Costa, we also confirm gated access, seasonal occupancy, strong sunlight and rooms shared with the living area.
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
The room itself, opening, access and door movement are checked before the arrangement and elevation are approved.
Drawings, finishes, hardware, scope and cost breakdown are accepted prior to manufacture is booked.
Delivery, protection, installation, adjustment and final review are coordinated in Orihuela Costa. The approach is adapted to apartments, terraced properties, villas and homes inside residential developments, without turning location into a preset style.
A nominal dimension is not enough here. We examine wide doors, higher door counts, top cupboards and continuous panels. After the review, the selected composition reflects its actual work.
Geometry sets the limit. Within it, we size hinges, soft closing, push catches, restrictors and accessories. The answer must meet one condition: each mechanism relates to weight and frequency.
This point is explained before pricing: we compare board, lacquer, veneer, mirror, finger pulls and applied handles. The later check confirms the essential result: preparation, edging and machining appear in the project content.
The drawing records how we include carcasses, equipment, access, hanging, adjustment and review. A later review leaves one clear criterion: the elevation is assessed as part of the complete wardrobe. For a property around Dehesa de Campoamor, access and handling are reviewed before component sizes are fixed.
Projects may involve apartments, terraced properties, villas and homes inside residential developments. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.
For custom hinged-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.
Gated access, seasonal occupancy, strong sunlight and rooms shared with the living area can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.
The recommendation continues to prioritise durable surfaces, concealed storage and fitting coordinated with the development. Materials and accessories are compared by care and usefulness, not by a presumed local style.
We publish how to contact us and when the team is available. Project-actual circumstances in Orihuela Costa are recorded before workshop production.
We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Orihuela Costa office by appointment.
The project team remains the point of contact: it organises the brief first, then coordinates technical decisions and handover in Orihuela Costa.
The enquiry is associated with mueblesamedidaorihuelacosta.es and proyectos@mueblesmedidavalencia.es. Controller details and terms of use appear in the legal notice.
Enquiry hours: Monday–Friday 09:00–13:00 / 14:00–20:00. Saturday 10:00–13:30 / 16:00–19:30.
Coverage, duration, supplied elements, fitting conditions, maintenance and exclusions are set out in writing prior to production.

Share any plans or photos you have and when you can access the property. We can then distinguish initial guidance from the checks needed on site.
Scope and terms are confirmed before you place an order.
Narrower leaves can be compared where they improve opening, weight or proportion. The interior must remain accessible.
Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.
The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.